Search
  • Patient Safety, Inc.

New Patient Video!

We have been working hard to make things easier for our customers. This has manifested in a few ways. One of which has been creating many "how-to" videos on our Youtube Channel. Our newest video explains to patients how to use our SleepSat 3-D Hi-Res Oximeter overnight. We have included a link to the video at the end of this blog post. Your patients can easily find the video online, at https://www.sleepsat.com/patientvideo or by searching on YouTube for "SleepSat patient instructions".


To use the Sleep Sat 3-D Hi-Res Oximeter overnight:

  • Take out the patient instructions, finger sensor, and the SleepSat device.

  • Remove your watch and any jewelry you are wearing as well. Fingernails should be clean and polish free.

  • Plug finger sensor into the SleepSat wrist unit.

  • Put wrist band on your non-dominant arm. Adjust to fit.

  • Insert one of your fingers into the sensor. Make sure your finger is inserted COMPLETELY! Your fingertip should touch the end of the sensor.

  • Optional: Attach the sensor cable loosely to the back of the hand.

  • Press in on the power button firmly until the display lights up. Lie still for 2 minutes before falling asleep.

  • If the finger sensor on your SleepSat comes off or is removed during the night, or, if the wrist unit is flashing "Sen Off": Put the sensor back on (make sure your finger is fully inserted), and press the power button firmly until the display lights back up.

  • In the morning: Take the oximeter off. The oximeter will turn off automatically after 2 minutes.


If you're interested in checking out our new Instructional Video you can watch below, you can head to our website, or you can watch it on our YouTube Channel.


2 views

CONTACT US:

EMAIL:   contact@patientsafetyinc.com

PHONE:  888.666.0635 

Patient Safety, Inc, Columbus, OH, USA

Copyright © 2020 Patient Safety, Inc. | All Rights Reserved